swt_a_series_precision_lock_nut_m12x1_25p
Kind reminder：
This product is only the 3D model data of the product, not the product itself! It is a standard part model of nut. The test data is a 3D model, which is available for free download. It is read-only 3D model data, and cannot be modified; Format: prt. Please open it with ugnx12 software and enter the password: 3dbzjxz.com
The unlimited version of our store is in the regular 3D format: stp, It can be opened with other 3d software such as proe, ceo and solidworks. If necessary, please place an order!
Notice before purchase: This is a virtual product. Once it is sold, it will be automatically shipped, and no refund is supported temporarily. Please confirm that you have a real purchase intention before placing an order. If you encounter problems when downloading, please consult the seller to obtain data again.
Series A locking nuts, designed for three (or two) equidistant locking copper bolts, have the same thickness F series and are suitable for applications where axial distances are limited. Since the locking copper bolts will not deform, series A locking nuts can maintain their original accuracy even after several loading and unloading operations.
When installing the main shaft, ball screw or bearing, in order to prevent the nut from loosening, two round nuts are usually used to lock each other. Due to the excessive runout of the thread and the plane, the shaft is deformed, which makes the mechanical accuracy and life difficult to meet the requirements of the designer. In particular, A series ventral locking nuts adopt the processing technology of one-time clamping and fine turning or grinding of the end face, which effectively prevents the shaft deformation during installation. With a variety of locking forms, it is easy for you to install, lock and disassemble, and fully meets the design requirements of the designer.
温馨提示：
此商品只是产品的3D模型数据，而不是产品本身！它是一个牙腹锁紧螺母标准件模型，试下数据为3d模型，提供免费下载，它是只读的3D模型数据，无法修改；格式为:prt,请用ugnx12软件打开它,并输入密码：3dbzjxz.com
本店无限制版本为常规3D格式:stp，可用其它3d软件如:proe、cero、solidworks打开，若有需要,请下单购买!
买前须知：这是虚拟商品，一经售出自动发货，暂不支持退款，请确认您有真实的购买意愿再下单购买，如果您下载的时候遇到问题，请咨询卖家，重新获取数据。
A系列锁紧螺母，为三个(或二个)等距锁紧铜栓设计，其厚度F系列相同，适用于轴向距离受到一定限制的情况下。由于锁紧铜栓不会变形，A系列锁紧螺母虽经多次装卸，仍然可以保持原始精度。
安装主轴、滚珠丝杠或轴承时，为了防止螺母松动，通常使用的两个圆螺母对锁，因其螺纹与平面偏摆量过大，造成轴变形，致使机械精度和寿命很难达到设计者的要求。特别针对于此，A系列牙腹锁紧螺母，采用端面一次装夹同时精车或研磨的加工工艺，有效防止安装中的轴变形，配以多种锁紧形式，既易于您的安装锁紧又方便拆卸，完全满足设计师的设计要求。
