swt_fa_m140x2P

Kind reminder：

This product is only the 3D model data of the product, not the product itself! It is a standard part model of nut. The test data is a 3D model, which is available for free download. It is read-only 3D model data, and cannot be modified; Format: prt. Please open it with ugnx12 software and enter the password: 3dbzjxz.com

The unlimited version of our store is in the regular 3D format: stp, It can be opened with other 3d software such as proe, ceo and solidworks. If necessary, please place an order!

Notice before purchase: This is a virtual product. Once it is sold, it will be automatically shipped, and no refund is supported temporarily. Please confirm that you have a real purchase intention before placing an order. If you encounter problems when downloading, please consult the seller to obtain data again.

There are some locking pins equidistantly distributed around the circumference of the tooth-web lock nut, which can be locked onto the shaft after the nut is pressed down with the fastening screw. The end faces of each locking pin are machined to match the shaft threads. The drilling axis of the locking pin and the fastening screw is parallel to the loading surface of the shaft thread. When tightening to the recommended torque, the locking screw provides sufficient friction between the end of the locking pin and the unloaded threaded side to prevent the nut from loosening under normal operating conditions. The advantages of abdominal locking nuts are:

1. No keyway required

2. Reusable

3. Suitable for frequent disassembly.

4. Since the locking pin is pressed against the unloaded side of the shaft thread, it will not be subjected to any applied load on the nut.

Specification parameters

Name: Precision lock nut

Type FA

Material quality 42CrMo

Precision IS0 4H

Hardness HRC28 Degree-32 Degree

Plane yaw 0.005MM

SWT/FA locknut has four grooves machined along the circumference; Nuts 15 or less are machined with two directly positioned planes and can be clamped with a common wrench. This design mainly meets the requirements of high accuracy, simple installation and stable locking.

FA Series Precision Lock Nut 3d models download,ugnx 3d models download,3d model download,stp 3d models download

温馨提示：

此商品只是产品的3D模型数据，而不是产品本身！它是一个牙腹锁紧螺母标准件模型，试下数据为3d模型，提供免费下载，它是只读的3D模型数据，无法修改；格式为:prt,请用ugnx12软件打开它,并输入密码：3dbzjxz.com

本店无限制版本为常规3D格式:stp，可用其它3d软件如:proe、cero、solidworks打开，若有需要,请下单购买!

买前须知：这是虚拟商品，一经售出自动发货，暂不支持退款，请确认您有真实的购买意愿再下单购买，如果您下载的时候遇到问题，请咨询卖家，重新获取数据。

牙腹锁紧螺母圆周上有等距分布的一些锁定销,可以用紧定螺钉压紧螺母后，锁定到轴上。每个锁定销的端面都经过加工，以便匹配轴螺纹。锁定销和紧定螺钉的钻孔轴线平行于轴螺纹的受载面。当拧紧到推荐扭矩时，锁定螺钉在锁紧销的末端和不受载的螺纹侧之间提供足够的摩擦，以防止螺母在正常运行条件下松动。、牙腹锁紧螺母的优势有：
1、无需键槽
2、可重复使用
3、适用于频繁拆卸场合。
4、由于锁定销紧压在轴螺纹不受载一侧，因此不会受到施加在螺母上的任何应用载荷。

规格参数
名    称    精密锁紧螺母
型    号    FA型
材    质    42CrMo
精    度    IS0 4H
硬    度    HRC28°-32°
平面偏摆    0.005MM

SWT/FA型锁紧螺母沿着圆周加工有四个凹槽;尺码在15或以下的螺 母，加工有两个位置正对的平面，可以使用一般的扳手来将其夹紧。 这种设计主要满足高精度、安装简单和稳固的锁定等要求。