BeltConveyor_W250_L320

试用数据点击上方下载！

The operation process of the lifting and transferring machine is a complex process involving multiple steps and components. The following is a detailed description of its action process: 
1、 Initial state 
When the overhead transfer machine is not yet in operation, it is usually in standby mode. At this point, the items on the conveyor belt are in their initial position, and both the lifting mechanism and the transfer mechanism are in an inactive state. 
2、 Goods flow in 
When the item flows into the top lift transfer machine through other conveyor lines, the sensor will detect the arrival of the item. 
Once the sensor detects that the item is in place, the conveyor line will stop running to ensure that the item does not move during the lifting process. 
3、 Lifting action 
After receiving the signal from the sensor, the cylinder starts working. The piston rod of the cylinder extends, pushing the lifting mechanism upwards. 
The lifting mechanism usually includes one or more lifting plates or lifting frames, which are connected to the cylinder through components such as connecting rods and sliders. 
As the piston rod of the cylinder extends, the lifting plate or lifting frame gradually rises, lifting the item from the conveyor belt. 
During the lifting process, there is usually a buffer mechanism to ensure a smooth and impact free lifting action. This can be achieved through sliding the slider on the guide rod, linkage of the connecting rod, and other methods. 
4、 Transfer action 
When the item is lifted to the designated height, the cylinder stops working. At this point, the transfer agency begins to operate. 
The transfer mechanism usually includes one or more lateral pushing devices, rotating devices, or tilting devices, etc., used to transfer items from the lifting mechanism to the target position. 
For example, in a lateral pushing device, a pushing plate or rod will move horizontally to push items from the lifting mechanism to adjacent conveyor lines or workbenches. 
In the rotating device, the lifting mechanism and the object can rotate together by a certain angle to place the object in the target position. 
In the tilting device, the lifting mechanism can tilt at a certain angle to slide the object to the target position. 
5、 Reset and Loop 
After completing the transfer action, the lifting mechanism begins to descend. The piston rod of the cylinder retracts, driving the lifting plate or lifting frame to gradually descend. 
When the lifting mechanism returns to its initial position, the cylinder stops working. At this point, the overhead transfer machine is ready to receive the next item. 
The entire lifting and transfer process can be carried out in a loop to achieve continuous item transportation and transfer. 
6、 Precautions 
During the process of lifting and transferring loads, it is necessary to ensure the normal operation of components such as sensors, cylinders, lifting mechanisms, and transfer mechanisms. 
It is necessary to regularly inspect and maintain these components to ensure their accuracy and reliability. 
When designing a lifting and transfer machine, it is necessary to fully consider factors such as the weight, size, conveying speed, and accuracy requirements of the items. 
In summary, the action process of the lifting and transferring machine is a complex process involving multiple steps and components. By precisely controlling the operation of components such as sensors, cylinders, lifting mechanisms, and transfer mechanisms, continuous transportation and transfer of items can be achieved.