swt_f_m68x2_0

Kind reminder：

This product is only the 3D model data of the product, not the product itself! It is a standard part model of the dust ring. The test data is a 3D model, which is available for free download. It is read-only 3D model data, and cannot be modified; Format: prt. Please open it with ugnx12 software and enter the password: 3dbzjxz.com

The unlimited version of our store is in the regular 3D format: stp, It can be opened with other 3d software such as proe, ceo and solidworks. If necessary, please place an order!

Notice before purchase: This is a virtual product. Once it is sold, it will be automatically shipped, and no refund is supported temporarily. Please confirm that you have a real purchase intention before placing an order. If you encounter problems when downloading, please consult the seller to obtain data again.

The important parameters of this product are as follows:

model:swt-f-Thread size-Dxh

Outer diameter of jam nut=D

Jam nut heightr=h

SWT/F series
For SWT/F series locking nut, its brass locking pin forms a angle of 30 degree with the thread. It does not bearthe axial load forced on the thread. Once the nut is locked, the thread surface will not release axial load and the nut will not be deformed. Three lock nuts with equal spaces can precisely position the nut, keep it perpendicularto the shaft. F-type nuts can ensure their precision even after multiple assembly and dis-assembly.
Material: 42CrMot45#f 40Cr
Hardness: HRC28=—32s
Thread Precision: ISO4H
Run Out: 0.005mm

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

温馨提示：

此商品只是产品的3D模型数据，而不是产品本身！它是一个刮尘圈标准件模型，试下数据为3d模型，提供免费下载，它是只读的3D模型数据，无法修改；格式为:prt,请用ugnx12软件打开它,并输入密码：3dbzjxz.com

本店无限制版本为常规3D格式:stp，可用其它3d软件如:proe、cero、solidworks打开，若有需要,请下单购买!

买前须知：这是虚拟商品，一经售出自动发货，暂不支持退款，请确认您有真实的购买意愿再下单购买，如果您下载的时候遇到问题，请咨询卖家，重新获取数据。

此产品重要参数如下：

型号：swt-f-螺纹规格－Dxh

牙腹锁紧螺母外径=D

牙腹锁紧螺母高度=h

SWT/F系列

对于SWT/F系列锁紧螺母，其黄铜锁销与螺纹形成30度角。它不承受施加在螺纹上的轴向载荷。螺母锁定后，螺纹表面不会释放轴向载荷，螺母也不会变形。三个等间距的锁紧螺母可以精确定位螺母，使其与轴垂直。即使在多次装配和拆卸后，F型螺母也能确保其精度。

材料：42CrMot45#f 40Cr

硬度：HRC28=-32s

螺纹精度：ISO4H

跳动：0.005mm